Don't be misled, only deal with the OFFICIAL Australian distributors.

Sea-Doo Storage Cover - SP (1989-1997) / SPI (1993-1996) / SPX (1993-1994)


$349
Code: 111WS104
Please Note: If you are buying more than one item, to ensure you not charged shipping on every item you buy, please phone us to place your order. (Or alternatively email us with your order).

SBT Watercraft Superstore Storage Cover - Sea-Doo SP (1989-1997) / SPI (1993-1996) / SPX (1993-1994)

A good storage cover is essential to protect your Sea-Doo watercraft while it is stored.

Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Sea-Doo PWC cover comes with a tie down strap kit for trailering and a storage bag to keep your cover in while you are out riding.

The covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.

All Sea-Doo covers come in a Black and Gray 2 tone color pattern.

NOTE: Images shown are generic. Colour is correct (Black/Gray) but may not reflect the exact shape of your watercraft. Please use Applications list below to confirm correct model fitment.

Applications:

1989 Sea-Doo SP Storage Cover

1990 Sea-Doo SP Storage Cover

1991 Sea-Doo SP Storage Cover

1992 Sea-Doo SP Storage Cover

1993 Sea-Doo SP Storage Cover
1993 Sea-Doo SPX Storage Cover
1993 Sea-Doo SPI Storage Cover

1994 Sea-Doo SP Storage Cover
1994 Sea-Doo SPX Storage Cover
1994 Sea-Doo SPI Storage Cover

1995 Sea-Doo SP Storage Cover
1995 Sea-Doo SPI Storage Cover

1996 Sea-Doo SP Storage Cover
1996 Sea-Doo SPI Storage Cover

1997 Sea-Doo SP Storage Cover


Additional Images:


Warranty:

Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

Fitting Instructions:

Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.

If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.

The watercraft should always be clean before installing any cover to prevent damage to the finish.