Don't be misled, only deal with the OFFICIAL Australian distributors.

Kawasaki Storage Cover - SXR 800 (2003-2011)



$349
Code: 111WS205
Please Note: If you are buying more than one item, to ensure you not charged shipping on every item you buy, please phone us to place your order. (Or alternatively email us with your order).

New SBT Watercraft Superstore Storage Cover - Kawasaki SX-R 800 (2003-2011)

A good storage cover is essential to protect your Kawasaki watercraft while it is stored.

Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Kawasaki Jet Ski cover comes with a tie down strap kit for trailering and a storage bag to keep your cover in while you are out riding.

The Kawasaki covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.

All Kawasaki covers come in a Black and Gray 2 tone color pattern.

NOTE: Images shown are generic. Colour is correct (Black/Gray) but may not reflect the exact shape of your watercraft. Please use Applications list below to confirm correct model fitment.

Applications:

2003 Kawasaki SX-R 800 Storage Cover

2004 Kawasaki SX-R 800 Storage Cover

2005 Kawasaki SX-R 800 Storage Cover

2006 Kawasaki SX-R 800 Storage Cover

2007 Kawasaki SX-R 800 Storage Cover

2008 Kawasaki SX-R 800 Storage Cover

2009 Kawasaki SX-R 800 Storage Cover

2010 Kawasaki SX-R 800 Storage Cover

2011 Kawasaki SX-R 800 Storage Cover

Additional Images:


Warranty:

Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

Fitting Instructions:

Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.

If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
The watercraft should always be clean before installing any cover to prevent damage to the finish.