Don't be misled, only deal with the OFFICIAL Australian distributors.

New SBT Blacktip Jetsports Universal PWC Jetski Storage Cover to suit any brand/model up to 9'6" (2.895 metres)

A good storage cover is essential to protect your watercraft while it is stored.

Our cover is made of 600D solution dyed polyester, which means the color goes all the way through and is much more fade resistant that other covers. Each Watercraft Superstore Jet Ski cover comes with a tie down strap kit for trailering and a storage bag to keep your cover in while you are out riding.

The Watercraft Superstore covers work great for indoor and outdoor storage applications and the 600D material is breathable to help prevent mildew growth and allow moisture to evaporate.

All Universal covers come in a Gray only.

Watercraft Superstore covers have a 1 year warranty against defects in workmanship or material.

Watercraft Superstore covers have a 1 year manufacturer's warranty against defect in material and workmanship. This warranty does not cover fading, tearing or stains which are likely during normal use. Environments with extreme weather conditions might have an adverse effect on the longevity of the material which will not be covered under warranty.

Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the sock cord for stationary storage.

If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover.
The watercraft should always be clean before installing any cover to prevent damage to the finish.